New 200 amp TrackStar sensorless ESC for 1/5th scale cars and gas to electric conversions, it features a full alloy housing with a huge heatsink to ensure it keeps its cool, even if pushed a little too hard the inbuilt thermal protection is in place to protect your investment. This ESC has been built with one thing in mind - RAW BRUSHLESS POWER!
Our TrackStar 1/5th ESC has a 15A BEC output for all your servo requirements. Even the 1/5th Baja boys will be happy with this one!
This ESC is programmable via the TrackStar Programming card. The ESC firmware can be updated by connecting the ESC to a computer via smart program box.
Features:
• Built-in powerful BEC. Output voltage is adjustable 6.0V or 7.4V.
• Maximum output current up to 15A.
• LiPo battery support up to 8 cells.
• Data Logging: The controller’s parameters can be recorded such as your battery volts/amps, draw, motor rpm, and controller temperature. This is a good way to make sure that the rest of your setup is performing well within its limits.
• Red copper connectors are used to decrease the internal resistance in high current situations.
• Heat transfer: Internal resistance is reduced by laminated copper stack control technology so dynamic thermal equilibrium is achieved.
• Safety features: low voltage protection, motor and ESC overheat protection and signal lost protection.
• The ESC can be programmed by TrackStar Multi-Function Smart Program Box
Specs:
Car size: 1/5th scale on-road/off-road
Working current: 200A
Burst current: 800A
Motor Type: Sensorless Brushless
Cell count: 4-8s Lipo
Motor Limits: <= 1100KV, 4 poles
Resistance: 0.0002ohm
BEC Output: 6.0V/7.4V @ 15A
Connections: 8mm Bullets
Dimensions: 111mm x 44mm x 37mm
Weight: 359g
Programming options: (Via Optional programming card)
Brake/Reverse type
Brake amount
Reverse amount
Punch Control
Drag Brake
Throttle Dead Band
Voltage Cut off
Motor Timing
