Wczytuję dane...
Zasoby dotyczące bezpieczeństwa i produktów
X
  • Załączniki bezpieczeństwa
    Załczniki do produktu
    Załączniki dotyczące bezpieczeństwa produktu zawierają informacje o opakowaniu produktu i mogą dostarczać kluczowych informacji dotyczących bezpieczeństwa konkretnego produktu
  • Informacje o producencie
    Informacje o producencie
    Informacje dotyczące produktu obejmują adres i powiązane dane producenta produktu.
    MULTIPLEX
  • Osoba odpowiedzialna w UE
    Osoba odpowiedzialna w UE
    Podmiot gospodarczy z siedzibą w UE zapewniający zgodność produktu z wymaganymi przepisami.
Model: MPX-SMART-SX-6
Kod producenta: MPX-SMART-SX-6
Wysyłka od: 20.00 PLN
Producent: MULTIPLEX

Multiplex SMART SX M-LINK 2.4GHz - inteligentna aparatura 6-kanałowa z odbiornikiem RX-5 M-LINK
To jedna z najlepszych kompaktowych aparatur 6 kanałowych o dużym zasięgu.

Zestaw zawiera:

  • nadajnik: :SMART SX M-LINK 2.4GHz
  • odbiornik: RX-5 M-LINK
  • Wersja BULK - bez pudełka.
Dane techniczne:
SMART SX transmitter
Frequency band: 2.4 GHz
Transmission type: FHSS M-LINK
Aerial: Integral IOAT aerial
Servo channels: 6
Model memories: 50
Servo signal format: 1.5 +/- 0.55 ms (at 100% travel)
Power supply: 3 AA-size cells
Current drain: approx. 85 mA
Weight: approx. 355 g (incl. batteries)
Dimensions (L x W x H): approx. 193 x 148 x 53 mm
RX-5 light M-LINK receiver
Servo channels: 5
Connector system: UNI
Receive system: 2.4 GHz FHSS
Operating voltage: 3.5 V … 9.0 V
Power supply: 4 - 6 NiXX cells, 2S LiXX
Permissible operating
temperature range: - 20oC … + 55oC
Weight: approx. 7 g
Dimensions (L x W x H): approx. 34 x 19.5 x 11 mm
The SMART SX M-LINK is a compact, intelligent six channel beginner’s radio control system incorporating a series of amazing features, some of them patented:
• Intelligent, patented model identification system
• IOAT: new, patented aerial technology: for a significant improvement in safety standards: transmission range well beyond the limits of vision with the aerial integrated into transmitter case
• Can be installed into virtually all available RC models
• An incredibly large number of models can be operated simultaneously without suffering interference
• Long operating time - up to 25 hours
• Intelligent model identification
• Digital trims
• Long operating time (3 x AA) (up to 25 hours)
• Can be updated via integral interface (USB lead and MPX Launcher)
• Ergonomically efficient: light, compact, designed for hand-holding
• Audible feedback buzzer: trim, Dual-Rate, mode select, transmitter battery, range-check
• Trainer mode capability (wireless system) using M-LINK Trainer stick (for use with all Teacher-capable MPX transmitters with multi-function socket) or Trainer module (PROFI TX)
 
 If an M-LINK ID receiver is installed, the transmitter automatically identifies the model, and activates the corresponding settings from its substantial bank of model memories (50). The proven M-LINK 2.4 GHz transmission system guarantees full-range operation. As you would expect, the SMART SX can also be operated with any other M-LINK receiver.
 
All compatible MULTIPLEX ELAPOR® models - RTF to RR+ versions - are programmed in as standard. Since the transmitter is so straightforward to operate, it is child’s play to set up the system to control almost any other model from a vast range of manufacturers. The transmitter even stores the model’s final trim positions
 
Five fully proportional channels are available:
Elevator, rudder, throttle, two aileron and one auxiliary switched channel, located on the power trim switch
Polecamy
.
.rc.susco.pl.
.