Wczytuję dane...
Kod producenta: ALBATROSS-HU-16
Realizacja zamówienia: 7 dni
Wysyłka od: 20.00 PLN
Producent: Inny

Avios has designed a beautiful twin-engine Albatross HU-16 flying boat. What could be better than a large monohull flying boat gracing the skies or taxing across a lake? This excellent plane is made of strong EPO foam and comes with scale plastic fittings for an extremely realistic look. It is painted in a US Navy rescue scheme of seagull gray, yellow and white for easy visibility under all conditions.

 

The Albatross HU-16 came into service with the United States Air Force in 1949 and was primarily designed as an amphibious plane for search and rescue missions. It was extensively used for combat search and rescue in both the Korean and Vietnam wars. As an amphibian, it could land on both land and open sea and was optimized for 4-foot (1.2m) seas but could land in heavier seas.

 

The Albatross is well powered by twin Aerostar 3536-850KV motors with scale 3-blade 10x6 propellers. The 30A reversing ESCs make it easier to navigate around the water. The addition of a water rudder makes maneuvering on water even easier. The built-in flaps provide plenty of lift and make landings and takeoffs look easy. The Albatross provides a great presence in the air that will look outstanding at any time and can easily do scale passes that all enthusiasts enjoy.

 

Get out on the water and go soaring across the sky with the Avios Albatross.

 

Features:
• Classic Flying Boat design
• US Navy livery with pre-applied stickers
• Twin AeroStar reversing ESCs (water resistant)
• Twin 35mm AeroStar brushless motors
• Preinstalled electronics
• Water Rudder
• Navigation lights

 

Specs:
Wingspan: 1620mm (63.7”)
Length: 1210mm (47.6”)
Weight: 2300g
Motor: AeroStar 3536 850KV Brushless Outrunner
ESC: AeroStar 30A RVS
Propellers: 3-blade 10x6
Servos: 7x9g

 

Requires:
1 x 6 channel TX and RX
1 x 2700~4000mAh 4S Lipo Battery

 

Note: Manual can be found under the "Files" tab

Suggested Setup
Elevator: 12mm
Rudder: 25mm
Ailerons: 13mm 
Flaps: 20mm / 40mm
Exponential: 20-25%.
CG 80mm Leading Edge

Polecamy